Interested in racing? We have collected a lot of interesting things about Chh Plywood Bracing. Follow the links and you will find all the information you need about Chh Plywood Bracing.
ECOPLY SPECIFICATION & INSTALLATION GUIDE - …
https://chhply.co.nz/assets/Uploads/2e7756d489/Ecoply-Specification-Installation-Guide-September-2015.pdf
When specifying or installing any Ecoply®plywood products visit www.chhwoodproducts.co.nz or call 0800 326 759 to ensure you have current specification material and any relevant technical notes. The information contained in this document is current as at September 2015.
Ecoply® Barrier » Plywood NZ - CHH Ply
https://chhply.co.nz/ranges/ecoply/ecoply-structural-plywood/barrier/
Provides structural bracing when installed as per bracing specifications The panels can be exposed for a maximum of 180 days during the construction cycle. The sealing tapes can be exposed for a maximum of 180 days during the construction cycle. This means there are no hold-ups while the cladding has to be installed, e.g. brick layers etc
Home » Carter Holt Harvey
CHH Woodproducts manufactures both structural and outdoor timber for residential, commercial construction and outdoor applications. View Site Manufactured from sustainably-grown New Zealand plantation pine, CHH Plywood offers a range of appearance and performance rated plywood products. View Site
BARRIER
https://www.ecoplybarrier.co.nz/assets/Uploads/201402-CHH-Ecoply-BarrierEPBGTechnicalNote-v1.00.pdf
Information contained in this document is specific to the CHH Woodproducts range of plywood products and cannot be used with any other plywood products no matter how similar they may appear. For further information contact customer services on 0800 326 75 or visit www.chhwoodproducts.co.nz TECHNICAL NOTE March 2014 Fastening centres
CUT-IN PLYWOOD BRACING
https://www.ftma.co.nz/uploads/1/1/9/0/119000123/cut-in_plywood_bracing.pdf
The engineer added “The Eco-Ply bracing will not have a reduced capacity from being fixed to an 82.5mm frame as opposed to a 90mm frame”. A representative of CHH Wood Products in 2012 wrote: “The WWB report confirms that the rebated stud with the plywood nailed to the studs is in fact stiffer than a full 90 x 45 stud without plywood.
Home » Plywood AU - CHH Ply
Shadowclad ® plywood panels provide a beautiful, natural wood exterior cladding to any project whether used alone or accented with other building materials. Made from sustainably grown NZ plantation pine, Shadowclad can be used as a strong, lightweight exterior cladding. See more here Versatile, Durable & Sustainable.
Ecoply Bracing Specification EP1
http://www.organonarchitecture.co.nz/CLIENTS/Bishop-Blackmore/ConsentDocs/Ecoply%20Bracing%20-%20EP1%20Specification%20(Apr-09).pdf
Ecoply® Bracing Specification – EP1 April 2009 Single sided structural plywood brace Specification No. Minimum Wall Length Lining Requirements BUs/m Wind BUs/m Earthquake EP1 0.6 m 7mm Ecoply® or 12mm Shadowclad® one side 130 130 Framing Wall framing must comply with: NZBC B1 - Structure: AS1 Clause 3 Timber (NZS3604)
ECOPLY SPECIFICATION & INSTALLATION GUIDE
https://www.redmantle.co.nz/wp-content/uploads/2017/09/PLY_Ecoply-Specification-Guide-2014-WEB-050514-2.pdf.pdf
other ecoply products are also available in f11 upon request • thickness - ranging from 7 mm to 25 mm. (thicknesses above 25 mm subject to availability) • length - being 2400 mm and 2700 mm with a standard nominal width of 1200 mm • preservative treatment - being untreated, h3.2 cca or h3.1 losp azole treated • edge finish - being square edge …
Shadowclad® Exterior Plywood » Plywood AU - CHH Ply
https://chhply.com.au/ranges/shadowclad/products/
The Shadowclad Natural Groove product features a 9mm wide, 5mm deep groove profile every 150mm across the face of the sheet. Shadowclad Natural Groove is suitable both as an exterior cladding (H3 LOSP treated), and for internal dry situations (untreated product) that may be painted, stained or clear coated. More Info Here Natural Texture
Ecoply Bracing Specification - EPG
http://www.organonarchitecture.co.nz/CLIENTS/Bishop-Blackmore/ConsentDocs/Ecoply%20Bracing%20-%20EPG%20Specification%20(Apr-09).pdf
Where fasteners are in contact with CCA treated timber or plywood, or the bracing panel forms part of an exterior envelope, fasteners must be stainless steel. Stainless steel fasters must be annular grooved. Fastening Centres Fasteners are placed at 150mm centres around the perimeter of each sheet and 300mm centres to intermediate studs.
Got enough information about Chh Plywood Bracing?
We hope that the information collected by our experts has provided answers to all your questions. Now let's race!
