Interested in racing? We have collected a lot of interesting things about Is Line Good Enough For Methenol Drag Racing. Follow the links and you will find all the information you need about Is Line Good Enough For Methenol Drag Racing.
What Fuel Line Do You Need to run with E85 and Ethanol, or Methanol Fuel?
https://www.motionraceworks.com/blogs/motionblog/what-fuel-line-do-you-need-to-run-with-e85-and-ethanol-fuel#:~:text=This%20makes%20it%20an%20excellent%20option%20for%20corrosive,One%20drawback%20to%20PTFE%20line%20is%20the%20cost.
Masters of methanol – drag racing fuel system tricks
https://dragnews.com.au/masters-of-methanol-drag-racing-fuel-system-tricks/
The secrets of tuning methanol. When it comes to tuning a motor using methanol, Gower said it can be a forgiving fuel if you stay on the rich (fat) side. “You can be 10% rich and the engine will still run fine, but it will start to …
What Fuel Line Do You Need to run with E85 and Ethanol, …
https://www.motionraceworks.com/blogs/motionblog/what-fuel-line-do-you-need-to-run-with-e85-and-ethanol-fuel
PTFE is much harder to assemble but longevity wise it is not prone to temperature and pressure. This makes it an excellent option for corrosive fuel, as well as power steering lines, turbo oil lines, etc. For these reasons it is also a great option for E85 and Ethanol fuels as well as Methanol. One drawback to PTFE line is the cost.
How do I use Methanol in a Drag racing application?
https://www.speed-talk.com/forum/viewtopic.php?t=9935
Methanol is a good fuel for ET bracket racing where consitency is rewarded. That said, there are some things that need consideration. Although the fuel is cheaper, you burn quite a bit more. There is no free lunch. The fuel fittings will also need to be steel rather than aluminum since methanol is not really friendly with aluminum.
Weather Considerations for Racing Methanol
https://www.racingjunk.com/news/weather-considerations-for-racing-methanol/
A mixture of approximately 87% nitro and 13% methanol is reported to provide a best burn ratio in the popular nostalgia drag race classes. Because of a balanced mixture ratio, any volume of that mixture will burn completely.
Turbocharged Methanol Info - Racecar Book.com
https://racecarbook.com/tips/turbocharging/turbocharged-methanol-info/
In a recent drag race track test of a normally aspirated methanol engine, best performance was achieved at an AFR of 5.2 to 1. A richer AFR (smaller number) dramatically reduced power. That AFR would destroy a typical blown racing methanol engine.
Methanol and Oil Changes -Draglist.com Drag Racing
https://www.draglist.com/phpBB3/viewtopic.php?t=4404
Thanks Perry, that's good information. Being in the Northeast if I were to switch over to Methanol I would definitely get one of those gas primers where you can run it around on gas and only switch over to methanol prior to the burnout. I would like to get a little more than 2-3 outings between oil chanes, stuff to think about. Thanks for the info!
TOP END LUBE ADDITIVE TO METHANOL - Racecar Book.com
https://racecarbook.com/tips/top-end-lube-additive-to-methanol/
Answer: Most racers I have talked to have good success with top lube to inhibit corrosion. Some previous info mentioned some accumulation over time. The reason NHRA and IHRA do not allow it in fuel checks is they cannot distinguish between power enhancing additives (illegal) and top lube in their tests. So you are stuck with the mostly pure ...
best oil for methanol ride | Bob Is The Oil Guy
https://bobistheoilguy.com/forums/threads/best-oil-for-methanol-ride.49498/
Id like to hear which oils are best for methanol carbureted full race 355 displacement engine.Was thinking of using Delo 400 or Rotella T with Synpower as an additive.Will be changing the oil alot.Was using m1 5-30 and not satisfied with it.Thanks.
Ignition timing - Gasoline vs Methanol - Racingjunk Forums
https://www.racingjunk.com/forums/showthread.php?t=24142
You may try going a few and see what it does. I remember my 468 a few years back @ 39 degrees ran 8.40's, I decided to go 33 with it ran 8.20's. Slapped a different intake on it and moved it to 32 and it ran 8.0's, not to shabby for $1500 short block, in a 2010lb car. Hehe that's funny David,
Methanol Fuel-VP M1 | 99.95% Minimum Purity | VP Racing Fuels
https://vpracingfuels.com/product/m1/
VP M1 Racing Methanol fuel has a 99.95% minimum purity. It's the highest purity available in the United States. M1 helps engines run cooler compared to standard methanol blends. They're also subject to less corrosion when compared to standard methanol blends. Furthermore, we use only lined drums, which prohibit rust, corrosion and metal deposits that can contaminate fuel …
Got enough information about Is Line Good Enough For Methenol Drag Racing?
We hope that the information collected by our experts has provided answers to all your questions. Now let's race!
