Interested in racing? We have collected a lot of interesting things about Sag Rods Bracing Wind Girts. Follow the links and you will find all the information you need about Sag Rods Bracing Wind Girts.
Sag rods bracing wind girts - Eng-Tips Engineering Forums
https://www.eng-tips.com/viewthread.cfm?qid=115545
The exterior flange of the wall girt is obviously braced laterally by the exterior skin. For suction, the rods hanging down from above have good tension support, but questionable compressive stiffness. In addition to that, the rods are usually bolted through the web, and not connected to the interior flange.
sag-rod supported girts (girt design) - Eng-Tips Forums
https://www.eng-tips.com/viewthread.cfm?qid=236394
Which brings up another point--a 5/8" diameter rod which is 5' long (a typical girt spacing) can take 1000# of compression (Allowable Stress Design). So the sag rods can also resist upward girt buckling. I have begun to see a lot of contractors installing flange bracing on the backside of the girts.
Sag Rods as Lateral Supports for Girts and Purlins
https://ascelibrary.org/doi/10.1061/%28ASCE%290733-9445%281987%29113%3A7%281521%29
Sag Rods as Lateral Supports for Girts and Purlins Dimos Polyzois, A. M. ASCE Abstract Although cold‐formed sections provide substantial savings, because of their high strength‐to‐weight ratio, their cross‐sectional configuration gives rise to behavioral phenomena not encountered in the more familiar hotrolled sections.
Sag Rods - Tiger Profiles
http://www.tigerprofiles.com/products/cold-formed-profiles/sag-rods/
Our Bridging or Purlin Sag Rod system is the most adaptable and flexible Sag Rod system available, to securely brace both Z and C purlins and girts of depths 100, 150, 200, 250, 300, 350 and 400mm. It is also fast and easy to install and can …
Got enough information about Sag Rods Bracing Wind Girts?
We hope that the information collected by our experts has provided answers to all your questions. Now let's race!
