Interested in racing? We have collected a lot of interesting things about Werks Racing Clutch Setup. Follow the links and you will find all the information you need about Werks Racing Clutch Setup.
WERKS "Pro Clutch" instructions - Werks Racing
http://werksracing.com/proclutchinstructions.html
To complete assembly, place the Werks "Pro Clutch" installation tool on the top plate. Next rotate the clutch tool counter clockwise while rotating the flywheel clockwise. The clutch will lock into place, then simply squeeze the clutch tool and the flywheel together to seat the top plate. Your Werks "Pro Clutch" is now ready to use!
Werks Racing
http://www.werksracing.com/proclutch.html
The Werks "Pro Clutch" is available in both 32mm and 34mm diameter flywheels to fit in all of todays modern racing buggy and truggies. Included with the clutch system are our new "Long Life" aluminum clutch shoes which in most cases will last up to 2 gallons a set as well as 0.9mm, 1.0mm and 1.1mm springs to tune the engagement point of the clutch!
WERKS clutch - set up - R/C Tech Forums
https://www.rctech.net/forum/offroad-nitro-engine-forum/591365-werks-clutch-set-up.html
Offroad Nitro Engine Forum - WERKS clutch - set up - Hi, I was wandering if users of WERKS clutch could share their setup. What shoes, what springs etc. I've just received my own and I'm wandering how to set it up. ... the carbon shoes that are available through werks racing are of great quality actually , carbon shoes wear yes , but when used ...
Werks Racing
Werks Racing manufacturer of high end competition rc engines, fuel and accesories.
Werks 34mm "Light" Pro Clutch 4 Shoe Racing Clutch System
https://www.amainhobbies.com/werks-34mm-light-pro-clutch-4-shoe-racing-clutch-system-wrx6550/p183016
Werks 34mm "Light" Pro Clutch 4 Shoe Racing Clutch System. Installed on both an FX 5K DC, RB Concepts B9 and put into an Xray XB8 2019. The stock Xray bell fits perfectly, and lines up well for the buggies gear mesh. The clutch performed well on both motors, and has excellent full lock-up with good punch out of the corner.
WERKS clutch installation - YouTube
https://www.youtube.com/watch?v=Ie-Cp3w8khY
A condensed view of clutch basket removal and installation for a DL 1000, SV 1000 Suzuki V-Twin. Highlights of the procedure, pointing out common mistakes as...
WERKS clutch - set up - Page 5 - R/C Tech Forums
https://www.rctech.net/forum/offroad-nitro-engine-forum/591365-werks-clutch-set-up-5.html
The soft aluminums bite more, so you are not slipping your clutch as much (which also reduces wear on the composite shoes) giving you a punchier clutch but with the 2x composites still allowing some slip! 2x soft aluminums with 1.0's and 2x composites with 0.9's works awesome and has become Kortz's standard starting clutch set up! Most Bite
WERKS Parts - Home
The only place to buy a WERKS clutch basket for your Suzuki SV 1000 or DL 1000 DL 1050. Home of the best performing windshield for your BMW RT.
Werks Adjustable 4-Shoe 1/8 Off Road Clutch System (Carbon)
https://www.amainhobbies.com/werks-adjustable-4shoe-1-8-off-road-clutch-system-carbon-wrx6501/p2263
Just remove the clutch bell and turn the clutch adjusting nut! The tuning features of this clutch are desribed below, however the recommended starting setup is to use the Carbon shoes with gold spring set, and the spring tension nut should be set to 1 turn from flush. Clutch Springs: The Clutch springs are available in three different tensions.
Werks clutch review | StromTrooper
https://www.stromtrooper.com/threads/werks-clutch-review.256074/
DL 650 clutch baskets are completely different. The problems with the design of the DL 1000 are simply not there in the 650. While you could always install a precision bronze bearing and tighten up the tolerances, it isn't worth the trouble. There can always be a broken part, but that applies to all of the bike.
Got enough information about Werks Racing Clutch Setup?
We hope that the information collected by our experts has provided answers to all your questions. Now let's race!
